Digital and Data Equipment
Digital- und Datentechnik

Hewlett Packard
34907A "SUB-D"



Das Multifunktions-Modul Modell 34907 A von Agilent/HP ist ein Einschub für die Datenerfassungssysteme 34970 A und 34972 A mit folgenden technischen Eigenschaften:
  • Digitaler 16 bit Eingang und Ausgang
  • 100 kHz Totalisatoreingang
  • Zwei analoge ±12 V Ausgänge

Bestückt mit 37-poligem SUB-D Stecker, siehe Abbildung

Mehr Informationen finden sich im englischen Text und im anhängenden Datenblatt !

Ein Datenblatt zu diesem Artikel finden Sie hier.
Eine vergrößerte Abbildung befindet sich hier.

English translation of German description:
The Agilent 34907A Multifunction Module for use with the 34970 A / 34972 A Data Acquisition/Switch Unit allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer and two ±12V analogue outputs - all on a single earth-referenced module. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.

  • Digital input/ouput.
    Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.
  • Totalize input:
    Count events from devices like photo interrupters, limit switches and Hall-effect sensors.
    It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.
  • Analogue output:
    Use the two electronically calibrated analogue outputs to source bias voltages to your device under test, to control your analogue programmable power supplies or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.

Comes with 37-pole SUB-D connector as shown in picture

Please find a corresponding data sheet here.
Please find an enlarged image here.


Hewlett Packard HP 34907A "SUB-D"

Maße/ Dimensions : 315mm (B/W) x 95mm (H/H) x 20mm (T/D)
Gewicht/ Weight: 0,37 kg



Geprüft / Fully tested:   136,85 INKLUSIV MWST / 115,00 NETTO
Gewährleistung: 1 Jahr
One Year Warranty


Ref. #: -1079856173 Hewlett Packard HP 34907A "SUB-D"
© by Helmut Singer Elektronik Vertriebs GmbH